The latest Cirrus Logic CS43131 is an advanced minature DAC that is at the heart of the newest range of iFi mobile devices.
- Advanced 32-bit oversampled multi-bit modulator with mismatch shaping technology
- Dynamic Range of 130dB
- THD n of -115dB
iFi Audio GO Blu -Open-Box
- The pocket-sized GO blu delivers heavenly headphone sound on the go.
- The worlds first miniature Bluetooth DAC/amp to support the latest hi-res codecs and deliver the best-quality audio streaming from smartphones, tablets and other portable sources.
- First miniature Bluetooth DAC to use the latest QC5100 chipset. This means Bluetooth v5.1 and twice as much processing power as the previous version still widely used today.
Hi-Res Portable Bluetooth DAC
- Separate Bluetooth, DAC and amp stages individually optimized for maximum performance
- Built-in mic for hands-free calls when paired with your smartphone
- Balanced twin-mono circuit design with Direct Drive equals ultra-low distortion
- Fully-balanced and S-Balanced outputs make the most of all headphone types
Headphone Friendly
- Precision rotary volume control with auto-gain: Adjusts output to match your headphones
- Output delivers up to 5.6V for high power to drive even tough headphone loads with ease
- Two headphone outputs: 4.4mm Pentaconn balanced and 3.5mm S-Balanced
- S-Balanced output: Cuts distortion by 50% with single-ended headphone connections
Highlights
- Pocket-size DAC/amp delivers heavenly headphone sound on the go
- Connect wirelessly to phones, tablets and computers via high-definition Bluetooth
- Separate Bluetooth, DAC and amp stages individually optimised for maximum performance
- Balanced analogue circuit design delivers captivating sonic power and finesse
- Fully balanced and S-Balanced outputs make the most of all headphone and earphone types
- Whatever the source device Android, iOS, PC or Mac GO blu delivers maximum sound quality over Bluetooth
- Advanced Bluetooth module with QCC5100 handles every HD format
- Supported codecs include: aptX, aptX HD, aptX LL, aptX Adaptive, LDAC, HWA/LHDC, AAC, SBC
- Hi-res DAC stage with ultra-low jitter and customised digital filter
- Amp stage with twin-mono signal paths and Direct Drive technology ensures ultra-low distortion
- Precision rotary volume control with auto-gain adjusts output to match your headphones
- Delivers up to 5.6V of power drives even tough headphone loads with ease
- Two headphone outputs: 4.4mm Pentaconn fully balanced and 3.5mm S-Balanced
- S-Balanced output cuts distortion by 50% with single-ended headphone connections
- XBass and XSpace tailor sound to suit your headphones and personal sonic taste
- Built-in mic for hands-free calls when paired with your smartphone
- Can also be used as a Bluetooth receiver in a speaker-based audio system (via the 3.5mm output) or as a USB DAC/headphone amp (via the USB-C charging port)
- Battery life approximately eight hours (varies according to volume level and the power demands of the connected headphones/earphones)
From iFi Audio
Our newGO blu, pocket-rocket portable HD DAC/amp, is diminutive enough to take with you wherever you go! It gives you best sound from wired but the convenience of wireless as you no longer need to have a cable connection to your Smartphone.
Whether youre exercising at the gym with your Apple watch clocking your every step or catching up on your MacBook at your favourite coffee shop, theGO bluis the perfect companion.
It pairs wirelessly with your source device via Bluetooth with no need to worry about whether youve got the right cable for your Android or Apple device. Just pair andGO!
Weighs only26g
Thats less than an AA battery!
Max sonics. Free the Smartphone.
Traditional wireless headphones or earphones of any kind integrate Bluetooth processing, D/A conversion and amplification onto one, standard off the shelf chip. There is a ceiling to the sound quality that can be achieved.
Team good corded headphones or in-ear monitors, with a separate, high-quality portable DAC/headphone amp, and your sound quality will beat any pair of wireless headphone or earphones hands down.
TheGO blumeans no compromise on sound quality.
Pair theGO bluto your Apple/Android. Connect your favourite corded headphones to theGO bluand then tuck it away its so petite it will slip into your running gear or suit pocket. Its also gorgeous enough to show off by leaving it on the table at your favourite coffee shop!
Super Sound. Assured.
Most pocket-size Bluetooth DAC/headphone amps incorporate all-in-one system on a chip solutions to deliver input processing, digital-to-analogue signal conversion and amplification.
Not theGO blu.
Uniquely, for a device of this type and size, theGO blus clever design packs in separate Bluetooth, DAC and amp stages, each engineered in distinct blocks to deliver the ideal combination of cutting-edge specification and superb sound.
HDBluetooth.
TheGO bluuses the same Bluetooth 5.1 as seen in other recent iFi products. Furthermore, we have separated the modules so that every last drop of audio quality is unmatched.
- AACaptXaptX HD, aptX Adaptive, aptX Low-Latency
- LDAC& HWA/li>
- Bluetooth 5.1TM at 24/96kHz.
And when you wish, just use the USB-C connection and enjoy High-Res USB audio too!
10hour battery
Thats Paris to New York
The balance of power.
Diminutive. Balanced. Powerful.
TheGo bluamp circuitry benefits from symmetrical twin-mono signal paths and utilises iFisDirect Drivedesign concept. Plus it incorporates circuit components of a quality not commonly found in a device of this kind.
This means ultra-low distortion across the entire signal bandwidth. The sound is purer, clearer and more naturally expressive.
The amp stage delivers up to 5.6V, considerably more power than others. It handles tough headphone loads with ease. Auto-gainadjusts output up or down by 6dB to ensure signal strength suits the sensitivity of the connected headphones/earphones.
wiss Chrono design and implementation.
GO blusChronoDialis a masterpiece of precision engineering and, just like a Chronograph, it gives you precise, analogue volume control. You can use it to play, pause, and skip tracks forward and backwards and even activate the voice assistant on your Bluetooth-connected smart device. Heres how its constructed:
- Brass supporting column with anti-corrosion
- Brass locking nut with anti-corrosion
- Precision 304 stainless steel bearing
- 304 stainless steel main dial with beryllium cobalt copper coating
- High-purity nickel push-button spring
- Precision CNC machined AL6063 aluminium push button
GO Balanced.
Whether you use balanced or non-balanced headphones, you get the least noise and best channel separation for the most enjoyable music.
TheGO bluboasts a Pentaconn 4.4mm output enabling headphones equipped with balanced connectivity to take full advantage of theGO blus balanced amp design.
In addition, the 3.5mm output benefits from iFis proprietaryS-Balancedcircuitry. This cuts crosstalk and related distortion in half when used with regular, single-ended headphone connections, this is especially beneficial with high-sensitivity in-ear monitors.
Both outputs are gold-plated to resist tarnishing and thereby maintain optimum contact quality.
X-factor. Inside and out.
WithXBassto add back lost low-end grunt andXSpace to widen the soundstage, theGO bluis small on the outside but mighty on the inside. You will be immersed in its majestic musicality.
The X-factor doesnt stop with the sound. TheGO bluis built like a luxury Swiss watch the volume control has a watch crown machined by a watchmaker for the tightest of tolerances and has the luxury feel of Mont Blanc, thanks to our French product designer.
Made with the latest, most hi-tech materials and weighing in at a super featherlight 26grams or 0.06lbs, it will be your go-to music device.
We use Qualcomms new QCC5100 Bluetooth IC in combination with the Cirruc Logic 43131 as DAC to to create an audibly superior Bluetooth engine.
All the current high-definition Bluetooth audio formats are supported Qualcomms aptX Adaptive and aptX HD, Sonys LDAC and HWAs LHDC, regular aptX and aptX Low Latency, AAC (Apple iOS devices) and SBC (the plain vanilla Bluetooth codec).
Of the 24-bit-capable codecs, aptX Adaptive and aptX HD support up to 48kHz, while LDAC and LHDC reach 96kHz.
iFis Bluetooth engine can also be updated over-the-air, so future codecs may be added.
It is a superior method to the traditional single-ended circuit approach. Balanced circuits reduce noise and crosstalk. Less Interference clearer sound.
You normally find this set-up in products at the higher end of the price spectrum such as the Pro iCAN but iFi is now using this across its range to produce the best quality audio for all our customers.
As with many other iFi audio products, weve incorporated a custom OV Series operational-amplifier. This top-notch component contributes to the extremely low noise, low distortion (0.0001%) and wide bandwidth.
An important aspect of the circuit design is its direct-coupled nature (no coupling capacitor is present), achieved without a conventionally applied DC servo.
DirectDriveequals a direct signal path which means less signal degradation. This direct signal path is unequalled in audio and is the reason why the sound is so true.
XSpace is the iFi analogue signal improvement circuitry to get that music back outside of your head for much better headphone enjoyment.
XBass is an analogue headphone spatialiser. It opens up your music to give you the feeling of spaciousness experienced at a live concert.
TDK C0G (Class 1 ceramic) capacitors offer high stability and low losses for resonant circuit applications.
Getting ever closer to the theoretical ideal of pure, frequency-constant capacitance, these capacitors reduce capacitor-induced distortion to vanishingly low levels.
They are pricey but are a perfect addition to our products.
muRata control-type, low-ESR high-Q multi-layer capacitors. The ESR control aspect of the Murata is something special. Their noise suppression abilities are impressive.
